Rig mechanic/well service engineer Resumes in Nigeria: sylvester

Rig mechanic/well service engineer Resume

Contact Candidate

Name:

sylvester

Location:

Nigeria

Experience:

5-10 yrs

Willing to Relocate:

Yes

Willing to Travel:

Yes

Most Recent Job Title:

Rig mechanic/well service engineer

Personal Website:

Objective:

xpert in Rig mechanic/well servicing engineer

Resume Text:

Let us help you find a job, submit your resume now.

Or visit our education page to learn about getting your degree online

.....Begin Resume Preview.....

( 2001-2002)
Permit to work system certificate
*@Aberdeen training centre,uk
Senior secondary certificate examination (ssce,neco)
*Naze secondary school owerri north, imo state, Nigeria.( 1994 – 2000)
First school leavening certificate
*Uzil layout primary school owerri north, imo state, Nigeria ( 1988-1994)

Skills:
I have become familiar with HSE policies and regulations such as Permit to Work System, Risk Assessment, rigging and lifting regulations, PUWER and manual handling techniques. For more than three years I have been fulfilling the Offshore Safety Representative’s position and involved in assisting the installation and safety officers in creating new safety standards and updating the existing procedures as well as taking part in accident investigation and route cause analysis if required. I have experience in Helicopter Operations as a HDA or a Fire Fighter (depending on the situation), attending four to 10-12 helicopter landings per week, assisting with crane operations; Banks man-slinger, supply boat operations (bunkering fuel, water and stores handling). In addition to assisting with offshore crane ops, rigging-lifting ops, erecting and working on scaffolds, painting and blasting, tank entries for various purposes.
Whilst working on tankers as a pump man I gained experience of cargo and shipboard operations. Some examples include maintenance of deck equipment., deck corrosion protection (wet sand blasting by Quill kwik blast equipment., using of air driven chipping, grinding, de-scaling tools, spray painting by Graco equipment., hydro blasting (witch stationary HP system-up to 8000Psi ), service and maintenance of a wide range of winches, splicing wires and fibre ropes, navigational watch keeping, repair and maintenance of various types of cargo and ballast pumps (steam driven reciprocating pumps, steam and electric driven centrifugal pumps) and valves (on support level).

Technical:(permit to work system)
*Basic well test – expro Nigeria (2005)
*Advance wire line –expro Nigeria (2005)
*On the rig training and non certificate well control, Aberdeen Exprogroup) - 2007
*Drilling hole problems (while drilling for oil and gas) –A case study of erebi field-well one of the chevron-Texaco overseeing Nigeria limited, ekpan-warri – (2006)
*Comparative study of gas lift installation for oil production (which is used when producing pressure-bottom hole flowing pressure is very low)-A case study of okan field-well c of the chevron –Texaco oversees Nigeria limited,ekpan – warri.(2006)

Employment history;
Assistant Rig mechanic
Wilbros Nigeria
From May 2002 to June 2005

Responsibilities are;
• Reading isometric drawings, plans, general assemblies for installing piping structural steel, pipe rockers and supports.
• All facets of piping installation including marking out and setting out of pipe positions, pipe pathways, valve stations and pumps, development of life studies, pipe and flange preparation and bolt up.
• Identification of hazards, development and implementation of jobs safety procedures.
• Task planning and ensuring execution of works to highest level of safety.
• All rigging duties including regular inspection of all rigging and lifting gear, use of chains,slings,shackles,chain blocks and winches.
• Dogging duties including lift studies, crane set up, sling loads and directing cranes -20t franna,50t,75t,mobile + 400t crawler.
• Operate of 20t franna, elevated work platform, trucks and forklift.
• Clean and check unit, tools and equipment, perform routine maintenance in preparation for next job.
• Rigging down, loading of equipment and driving truck to shop.
• Ensuring correct rig up of equipment at site/location.
• Operate the principal services tools in an assigned area, conducts the operation of a services unit to maintain a high standard of efficiency and quality.
• To ensure that quality, cost effectively services is provided to each customer.
• Maintain assigned equipment and facilities in a neat, workable condition and conducts self in an exemplary manner at all time.
• Inspect and properly perform preventive maintenance for all drill floor equipment
• Maintains and inspect all derrick equipment.
• Trip pipe, using slips,tongs,elevators,line up choke or kill manifold, make connections and monitor mud weight, viscosity while drilling, laying casing(running casing) in hole after drilling.
• Setting up the tools, make up and remove BHA, wirline, and cementing, coring, completion.

Assistant welltest operator
Power well services Nigeria
July 2005 –. 2008
Responsibilities are; Packaging for well testing* Ensuring correct rig up of equipment on site* Ensuring pressure testing of equipment is performed in accordance with the company standard procedure and specific customer requirements* Clean and check unit tools and equipment* Performed routine maintenance in preparation for next job* Rigging down, loading of equipments and driving truck to shop* Ensure that quality cost effectively services is provided to each customer* Completion and well testing operation* Preparation and supervision of well tests onsemi-subs,drillships,jackup,fixed production platforms and onshore locations* Preparation and supervision of coil tubing activities on fixed platforms*Jack-ups and drillships,acid washing and selective acid stimulation, using inflatable pickers, nitrogen gas lifting, zonal isolation using inflatable packers* Function of down hole assessable and horizontal wells*Lodding operations using both internal conductor line and memory tools, or horizontal wells, fishing operations, on horizontal and vertical wells, includes the fishing of coil and wireline,milling and drilling operations on both vertical and horizontal wells* Gas lift change out, and all manner of fishing work/operation*Proficient in testing well@ surface, by flowing the well to the surface and measuring the well head pressure, the well head temperature, taking basic sediments and water.*Ability to control flow rate @ the choke manifold, changing chokes @ adjustable and fixed choke, ability to select the right choke size for a particular flow rate to minimize sand production and gas and water coming in the well – hence maintaining critical flow.*ability to control separator pressure, the liquid level of the separator, ability to also choose the right orifice plate size for a particular gas flow rate and the ability to read meters such as Rotron and Floco meters used in measuring Oil flow rate at the separator. In addition, ability to also read the level of the surge and gauge tanks of the surface well testing.

Work preparation;
Preparation, make up and tasting of completions for the following type of wells.
Single and single muiltizoned,dual and dual string muiltizoned completions, single string completions up to 700’’,horizontal completions,subsea completipons,DST strings and tools.

Planning;
Maintain wells files and planned maintenance effective manner, ensure that full service records maintain for wells, this includes down hole and well head equipment and activities, ensure personnel and equipment are available and aware of type of work to be carried out.

Safety:
Helicopter ditching and survival
Offshore base fire fighting course
Including breathing apparatus
Shell high pressure gas and oil fire fighting training.
HSE policy.
Award:
Outstanding performance award, by the management of (Expro group Nigeria.)

Office management and computer skills:
Ms Word, excel, PowerPoint, communication, programming, word processor, file maintenance, sorting of file.

Hobbies;
Football, travel and meeting new faces.

Please contact my references for further information.

19 jetty road abuloma town, portharcourt,
Rivers state, Nigeria.
+234 806 5609 265.
THE COVERING LETTER.

Dear Prospective Employer,
I would like to apply with your company for the position of a Rig Mechanic/well servicing operator, where I can use my skills and previous oilfield experience to help you obtain your company's mission. The enclosed resume will furnish you with complete information concerning my background and capabilities.
I am seeking an international position, preferably on a rotating schedule. I have 7 plus years of oilfield experience as an operator of numerous gas and oil production facilities. I am an innovative thinker with a demonstrated ability to improve production and decrease down time. I am very adaptable to changing projects and work schedules and have a proven ability to quickly train on different facilities.
In addition, I have excellent planning and organizational skills as well as excellent rapport with supervisors and co-workers. You will find I work well under pressure, am an effective problem solver and a conscientious and reliable worker.
Should you have an opening in your organization for a person with my qualifications, or should you be anticipating one in the near future, I would very much appreciate meeting with you for a personal interview at which time we can discuss in greater detail how my experience and genuine enthusiasm for getting the job done, getting it done safe, and getting it done right will benefit your company.
In the interim, I thank you for your time, attention and considerations.
Sincerely,
chukwuke Sylvester k.

A job posting is required to veiw full resumes.
Click here to post a job now.

WOMENSRESUMELIST

A Comprehensive Database of Unmatched Talent